VIS: Industrials Dashboard For December (NYSEARCA:VIS)

This monthly article series shows a dashboard with aggregate subsector metrics in industrials. It is also a review of sector exchange-traded funds (“ETFs”) like the Industrial Select Sector SPDR ETF (XLI), the Fidelity MSCI Industrials Index ETF (FIDU), and the Vanguard Industrials ETF (NYSEARCA:VIS), whose largest holdings are used to calculate these metrics.

Shortcut

The next two paragraphs in italics describe the dashboard methodology. They are necessary for new readers to understand the metrics. If you are used to this series or if you are short of time, you can skip them and go to the charts.

Base Metrics

I calculate the median value of five fundamental ratios for each subsector: Earnings Yield (“EY”), Sales Yield (“SY”), Free Cash Flow Yield (“FY”), Return on Equity (“ROE”), Gross Margin (“GM”). The reference universe includes large companies in the U.S. stock market. The five base metrics are calculated on trailing 12 months. For all of them, higher is better. EY, SY and FY are medians of the inverse of Price/Earnings, Price/Sales and Price/Free Cash Flow. They are better for statistical studies than price-to-something ratios, which are unusable or non available when the “something” is close to zero or negative (for example, companies with negative earnings). I also look at two momentum metrics for each group: the median monthly return (RetM) and the median annual return (RetY).

I prefer medians to averages because a median splits a set in a good half and a bad half. A capital-weighted average is skewed by extreme values and the largest companies. My metrics are designed for stock-picking rather than index investing.

Value and Quality Scores

I calculate historical baselines for all metrics. They are noted respectively EYh, SYh, FYh, ROEh, GMh, and they are calculated as the averages on a look-back period of 11 years. For example, the value of EYh for transportation in the table below is the 11-year average of the median Earnings Yield in transportation companies. The Value Score (“VS”) is defined as the average difference in % between the three valuation ratios ((EY, SY, FY)) and their baselines (EYh, SYh, FYh). The same way, the Quality Score (“QS”) is the average difference between the two quality ratios ((ROE, GM)) and their baselines (ROEh, GMh).

The scores are in percentage points. VS may be interpreted as the percentage of undervaluation or overvaluation relative to the baseline (positive is good, negative is bad). This interpretation must be taken with caution: the baseline is an arbitrary reference, not a supposed fair value. The formula assumes that the three valuation metrics are of equal importance.

Current data

The next table shows the metrics and scores as of last week’s closing. Columns stand for all the data named and defined above.

	VS	QS	EY	SY	FY	ROE	GM	EYh	SYh	FYh	ROEh	GMh	RetM	RetY
Aerospace+Defense	-32.28	-14.81	0.0452	0.5067	0.0210	16.63	19.64	0.0543	0.7786	0.0383	20.41	22.10	3.50%	21.70%
Building+Equipment	-39.71	23.48	0.0370	0.3261	0.0123	12.41	31.19	0.0424	0.8220	0.0228	9.71	26.18	-2.36%	-12.93%
Machinery+Conglomerates	-30.95	5.24	0.0383	0.3922	0.0176	21.48	37.48	0.0493	0.5465	0.0305	19.34	37.70	-3.23%	-7.14%
Services+Distribution	-27.00	20.87	0.0368	0.2900	0.0189	34.41	46.52	0.0401	0.4657	0.0291	23.37	49.22	-2.78%	-7.83%
Transportation	31.48	8.94	0.0534	1.0132	0.0320	31.36	22.56	0.0542	0.7131	0.0208	23.56	26.61	-1.42%	-11.74%

Click to enlarge

Value and Quality chart

The next chart plots the Value and Quality Scores by subsector (higher is better).

Evolution since last month

The value score has significantly improved in building and construction equipment.

Momentum

The next chart plots momentum data.

Interpretation

Transportation is undervalued by about 31% relative to 11-year averages. Moreover, its quality score is above the baseline, making it quite attractive from a fundamental point of view. Other subsectors are overvalued by 27% to 40% regarding the same metrics. Overvaluation may be partly justified by good quality scores for building/construction equipment and services/distribution. Aerospace/defense is below the baseline in both value and quality scores. However, it is the industry with the strongest momentum in the sector.

Focus on VIS

The Vanguard Industrials ETF (VIS) has been tracking the MSCI US IMI Industrials 25/50 Index since 09/23/2004. It has a total expense ratio of 0.10%, the same as XLI, and marginally more expensive than FIDU (0.08%). Shares are also available through a mutual fund (VINAX).

As of writing, the fund has 369 holdings. The next table shows the top 10 names with some fundamental ratios. Their aggregate weight is 31.2%.

Ticker	Name	Last	EPS growth %TTM	P/E TTM	P/E fwd	Yield%
HON	Honeywell International, Inc.	3.81%	0.56	26.79	23.97	1.97
RTX	Raytheon Technologies Corp.	3.75%	36.51	32.58	20.51	2.26
UPS	United Parcel Service, Inc.	3.58%	71.99	13.98	13.83	3.41
UNP	Union Pacific Corp.	3.50%	19.97	18.40	17.95	2.52
DE	Deere & Co.	3.30%	22.84	18.55	15.53	1.11
CAT	Caterpillar, Inc.	3.22%	47.08	16.88	16.73	2.07
LMT	Lockheed Martin Corp.	2.98%	0.47	22.13	20.94	2.49
BA	The Boeing Co.	2.60%	3.44	N/A	N/A	0
GE	General Electric Co.	2.43%	-183.99	N/A	30.50	0.41
NOC	Northrop Grumman Corp.	2.02%	23.21	15.20	21.52	1.30

Click to enlarge

The heaviest industry in the fund is aerospace/defense (17.7%). VIS has much more holdings than XLI (369 large to small caps vs. 75 large and mid caps). However, their performance and behavior since VIS inception are almost identical. The difference in annualized return is insignificant (20 bps)

	Total Return	Annual. Return	Drawdown	Sharpe	Volatility
VIS	379.70%	8.99%	-63.52%	0.49	19.69%
XLI	396.18%	9.19%	-62.05%	0.5	19.27%

Click to enlarge

In summary, VIS is a fund with cheap management fees for investors seeking capital-weighted exposure in industrials. No holding weighs more than 4% of asset value, so risks related to individual stocks are moderate. VIS or XLI are equivalents for buy-and-hold investors. However, higher trading volumes make XLI a better instrument for traders and tactical allocation strategies. Investors looking for a balanced portfolio in industrials may prefer the Invesco S&P 500 Equal Weight Industrials ETF (RGI), whose heaviest holdings weigh less than 1.7%.

Dashboard List

I use the first table to calculate value and quality scores. It may also be used in a stock-picking process to check how companies stand among their peers. For example, the EY column tells us that a transportation company with an Earnings Yield above 0.0534 (or price/earnings below 18.73) is in the better half of the subsector regarding this metric. A Dashboard List is sent every month to Quantitative Risk & Value subscribers with the most profitable companies standing in the better half among their peers regarding the three valuation metrics at the same time. The list below was sent to subscribers several weeks ago based on data available at this time.

RHI	Robert Half International, Inc.
BCO	The Brink’s Company
MATX	Matson, Inc.
BLDR	Builders FirstSource, Inc.
BCC	Boise Cascade Co.
WIRE	Encore Wire Corp. (Delaware)
TWI	Titan International, Inc.
XPO	XPO, Inc.
VNT	Vontier Corporation
LECO	Lincoln Electric Holdings, Inc.

Click to enlarge

It is a rotating list with a statistical bias toward excess returns on the long-term, not the result of an analysis of each stock.